Adaptive Learning is Here! Once thought of as impossible, CB Performance has done it! The new CB Quick Tune EFI System will self tune or "adapt" to your engine and driving style. All you need to do is type in your target Air-Fuel Ratio's and the Quick Tune EMS will handles the rest. Feel like mapping out your own fuel curve? No problem! You have full capability of designing your own fuel map. Ignition mapping is even easier with the CB Quick Tune EMS. The Dashboard Software condenses the ignition map into 33 RPM and load zones. The EMS interpolates between these zones creating a smooth exact timing map. Think you have a problem with something you have programmed into the EMS? Simply call CB for a Port and IP Address and go online with a CB EFI Tech. We can actually see your engine running from our computer! No longer are you married to the chassis dyno with the CB Quick Tune EFI system. Drive the car, let the EMS learn, and you're done! 

Please fill in the specs to your motor in the space given above when placing an order.  

Click on this link to read instructions: http://www.cbperformance.com/pdf/QTEFIInstructionManual.pdf

Click on this link to see the software set up guide: http://www.cbperformance.com/pdf/QTEFISoftwareSetup.pdf

YOU MUST HAVE A LAPTOP TO USE THIS FUEL INJECTION KIT

Each system is custom made so please allow approximately two to three weeks for delivery

Revolutionary Quick-Tune technology provides self learning and hands-free operation. Easily programs from single throttle body, dual throttle body, normally aspirated and turbo in four easy steps.

1. Ready - Install system with easy modular wire harness
2. Set - Set basic engine profile
3. Calibrate TPS sensor
4. Go - Start car and drive using the Smart-Tune technology that self-adjusts instantly to desired air/fuel ratios.

- You will not be married to the Chassis Dyno Operator any more with the Quick-Tune EFI System!
- Easy-to-wire batch fire system capable of firing 16 high-impedance injectors or 8 low-impedance injectors.
- Compatible with most aftermarket ignition systems: MSD, Mallory, Pertronix (Except Compufire DIS)
- Bosch Blue Coil is also not compatible.
- Compufire and pertronix modules are OK.
- Can also be used with stock points style ignition.
- One bar standard Map sensor for normally aspirated engines.
- Two and three bar (0-30psi) for boosted applications.
- Uses standard GM/Ford style sensors.
- Uses virtually all aftermarket wide band controllers.
- ECU is supplied with PLX Devices Wide Band controller with sensor.
- We recommend this controller for it's ease of installation.
- Complete dedicated harness, labeled for easy installation.
- Injector sizes from 18lb per hour all the way up to 80lb per hour.
- CB's award winning hex bar linkage.
- Complete fuel system is suppied in each kit.
- 4 different sizes of turbo chargers are available.
- A CB tech can help you size the turbo to your engine.
- Requires a laptop Computer with Windows software to program ECU, USB and Serial communication ports.
- All software is included.
- Network communication ready.
- You can enter a Port # and I.P address supplied by CB and go online live with a CB tech for product support.
- This requires an internet connection.
- Complete installation instructions are included.
- Much more!